View LG-110VY-CT_3034017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc. no : qw0905-lg- 110vy-ct rev. : a date : 17 - jan - 2005 data sheet LG-110VY-CT led smd ligitek electronics co.,ltd. property of ligitek only pb
part no. LG-110VY-CT device selection guide: device selection guide: features: 1. package in 8.0mm carrier tape on 7" diameter reel. 2. compatible with automatic placement equipment. 3. compatible with reflow solder process. descriptions: 1. the lg-110 smd taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. 2. besides, lightweight makes them ideal for miniature applications. etc. applications: 1. automotive : backlighting in dashboard and switch. 2. telecommunication : indicator and backlighting in telephone and fax. 3. flat backlight for lcd, switch and symbol 4. general use. emitted part no LG-110VY-CT aigainp material yellow water clear color lens ligitek electronics co.,ltd. property of ligitek only page 1/10
resin 1.5 3.2 led dice 5.0 1.0 note : the tolerances unless mentioned is ? 0.1mm,angle ? 0.5. unit=mm. 1.5 1.0 1.5 0.9 pcb recommended soldering pad dimensions note : 1.all dimension are in millimeter tolerance is ? 0.1mm unless otherwise noted. 2.specifications are subject to change without notice. r1.0 0.65 0.8 soldering terminal ligitek electronics co.,ltd. property of ligitek only 1.0 0.5 package dimensions 0.65 cathode mark page 2/10 part no. LG-110VY-CT
30 i f forward current ma f p symbol fd ??f 2 c 1/2 viewing angle forward voltage v f peak wavelength luminous intensity dominant wavelength spectral line half-width items iv 130 ---- 1.7 ---- ---- deg 2.6 v if=20ma if=20ma mcd unit nm 593 ---- ---- 590 ---- 20 ---- ---- nm ---- nm 60 typ. 20 min. ---- max. if=20ma if=20ma if=20ma if=20ma condition typical electrical & optical characteristics (ta=25 j ) soldering temperature tsol operating temperature electrostatic discharge reverse current @5v storage temperature tstg t opr esd ir max 260 j for 5 sec max -40 ~ +90 -40 ~ +85 2000 10 j j v g a absolute maximum ratings at ta=25 j symbol parameter power dissipation peak forward current duty 1/10@10khz i fp pd 60 78 ratings mw ma unit ligitek electronics co.,ltd. property of ligitek only page 3/10 part no. LG-110VY-CT
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( j ) relative intensity@20ma wavelength (nm) forward voltage@20ma normalize @25 j fig.4 relative intensity vs. temperature ambient temperature( j ) relative intensity@20ma normalize @25 j forward voltage(v) fig.1 forward current vs. forward voltage forward current(ma) forward current(ma) fig.2 relative intensity vs. forward current relative intensity normalize @20ma ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0 10 100 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -20 0 20 40 60 1.0 1.1 1.2 500 550 600 0.0 0.5 1.0 1.5 2.0 2.5 3.0 80 100 0.8 0.9 -20 -40 40 20 080100 60 2.0 0.0 0.5 1.0 1.5 2.5 3.0 650 typical electro-optical characteristics curve vy chip page 4/10 fig.6 directive radiation part no. LG-110VY-CT
3.4 5.3 8.00.3 2.0 3.50.2 aluminum moist-proof bag label LG-110VY-CT part no. description 8.0mm tape,7"reel packing specifications ?e note : the tolerances unless mentioned is ? 0.1mm,angle ? 0.5. unit=mm. polarity 4.00.2 1.87 label 3000 devices quantity/reel 1.25 1.5 ligitek electronics co.,ltd. property of ligitek only 1.75 carrier type dimensions 4.00.2 0.25 page 5/10 part no. LG-110VY-CT
label explanation reel dimensions 178 ? 1.5 0.8 0.2 0.4 0.6 r 13.5 ? 1.0 0.6 0.4 0.2 0.8 2.0 ? 0.5 6.0 ? 1.0 12.0 ? 1.0 9.0 ? 1.0 bin : luminous intensity hue : dominant wavelength 2.0 - 2.2 : forward voltage bin/hue : p/16 2.0 - 2.2 ??1qlu~a?|3--?q ligitek electronics co., ltd. part no. : LG-110VY-CT q'ty(pcs) : 3000 pcs lot no. : 93000056 ligitek led page 6/10 part no. LG-110VY-CT
3. 10 inner boxes / carton 4. carton size : l x w x h 49cm x 46cm x 29cm l w h l h w ligitek electronics co.,ltd. property of ligitek only 1. 5 bag / inner box 2. inner box size : l x w x h 23cm x 8.5cm x 26cm box explanation page 7/10 part no. LG-110VY-CT
rising +5 j /sec cooling -5 j /sec 120 sec.max. reflow soldering should not be done more than two times. preheat 180~200 c 3-2 pb-free reflow solder 1~5 c/sec 60 ~ 120 sec 120 150 preheat 260c max. 10sec.max above 220 c 60 sec.max. 1~5 c/sec time 5sec preheat 120 ~ 180 sec soldering heat max. 260 j 3-1. lead reflow solder 240 temp. ( j ) 2. wave solder 120 ~ 150 j 245 ? 5 j within 5 sec recommended soldering conditions 1. hand solder basic spec is ?? 280 j 3 sec one time only. ligitek electronics co.,ltd. property of ligitek only page 8/10 part no. LG-110VY-CT
page 9/10 ligitek electronics co.,ltd. property of ligitek only esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led. circuit model a led led circuit model b precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh60%, they should be treated at 60 j? 5 j fo r 15hrs. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value. part no. LG-110VY-CT
environmental test 1.t=260 c max. 10sec.max. 2. 6 min ir reflow 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface 1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles temperature cycling solderability test mil-std-750d:2031.2 j-std-020 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 ligitek electronics co.,ltd. property of ligitek only 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) endurance test classification 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles high temperature high humidity storage test thermal shock test low temperature storage test 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) high temperature storage test operating life test test item test condition reliability test: mil-std-202f:103b jis c 7021: b-11 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 jis c 7021: b-12 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 mil-std-883d:1008 jis c 7021: b-10 reference standard page 10/10 part no. LG-110VY-CT

▲Up To Search▲

Price & Availability of LG-110VY-CT

	To Download LG-110VY-CT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .